UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING

UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARING Product Name Pillow Block Bearing UCFL206 Structure Pillow block Bearing Locking Device Set Screw d 30 mm Seal Type Contact L 80 mm Set screw M6x0.75 H 148 mm Hexagonal key size for set screw 3 mm Designation, housing FL206 Recommended tightening torque for set screw 4 N·m The Designation, Radial Insert Ball Bearing UC206 Recommended diameter for attachment bolts, mm 14 mm Sealing solution Standard seals with additional flingers Total height unit 40.2 mm A 30 mm T min. -20 °C Product weight: 0.9  kg T max. 100 °C Housing Material Cast Iron Mounting Hole Center-to-Center (e) 117 mm Dynamic Load Rating (Cr) 19.5 kN S 15.9 mm Static Load Rating (Cor) 11.2 kN Mounting Slot Width (S1) 19.05 mm Lubrication Non-Relubricatable N 16 mm UCFL206 Bearing Features UCFL206 bearing is composed of a ball bearing and a diamond-shaped bearing housing. It can be installed on the vertical side of the machine. Compared with the square bearing housing, diamond-shaped pillow block bearing has less installation space, component quality has also decreased. 2 mounting bolt holes center distance of diamond-shaped bearing housing is the same as the square bearing housing’ So they are interchangeable with each other. When Install the bearing housing on the main body of the machine you must use both 2 bolts. Main application: Roller conveyor, Machines with small installation interval, etc. UCFL206 Pillow Block Bearing Cleaning and Inspection Cleaning When removing the bearing for inspection, first take pictures and other methods to make appearance records. In addition, confess the amount of remaining lubricant and sample the lubricant before cleaning the bearing. Inspection In order to distinguish whether the removed bearing can be used from scratch, it is important to check its standard accuracy, rotation accuracy, internal clearance, and wear of the cooperation surface, raceway surface, holding frame, and sealing ring.