UCFL204 2 Bolts Flange Housed Bearing Unit 20mm SUNBEARING

UCFL204 2 Bolts Flange Housed Bearing Unit 20mm SUNBEARING Product Name Pillow Block Bearing UCFL204 Structure Pillow block Bearing Locking Device Set Screw d 20 mm Seal Type Contact H 113 mm Set screw M6x0.75 U 33.3 mm Hexagonal key size for set screw 3 mm Designation, housing FL206 Recommended tightening torque for set screw 5.5 Nm The Designation, Radial Insert Ball Bearing UC206 End Type Open Sealing solution Standard seals with additional flingers Performance Light Duty A 25.5 mm Operating Temperature Range -40 to 250 ºF -40 to 120 ºC Product weight: 0.44  kg Rotational Speed [Max] 6700 RPM Housing Material Cast Iron Mounting Hole Center-to-Center (e) 15 mm Dynamic Load Rating (Cr) 12.7 kN S 12.7 mm Static Load Rating (Cor) 6.55 kN Mounting Slot Width (S1) 18.3 mm Lubrication Non-Relubricatable N 12 mm UCFL204 Bearing Features UCFL204 bearing will cope with initial misalignment, are sealed and pre-greased, have integral shaft locking, and simply bolt into place. The internal structure of the insert ball bearing is the same as that of the deep groove ball bearing. But the inner race of this bearing is wider than the outer race. The outer race has a spherical surface. Insert ball bearings can self-aligning with the fit between the outer race and the bearing block. Insert ball bearings are compact. It’s easy for loading and unloading. Spherical insert ball bearings often used in mining, metallurgy, textile, transportation machinery, etc.  Pillow Block Bearing Pillow Block Bearing UCP or NP Series Plummer / Pillow Housings: Supplied with a fully sealed bearing insert fitted in the housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted. The inserts (available separately) can be removed from the housings for future replacement as required. Benefits: Cost-effective bearing/housing assembly, re-lubricative, replaceable insert, grub screw fixing