UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING

UCF213 4 Bolts Flange Bearing 65*187*69.7mm Cast Iron SUNBEARING Product Name Pillow Block Bearing UCF213 Structure Pillow block Bearing Limiting speed Bearing with shaft tolerance h6 2350 r/min Bore Size 65 mm Housing material Cast iron Width Radial Insert Bearing To The Slot e (mm): 187 mm Set screw M10x1 Width Radial Insert Bearing a (mm): 69.7 mm Hexagonal key size for set screw 5 mm Designation, housing F213 Recommended tightening torque for set screw 16.5 N·m The Designation, Radial Insert Ball Bearing UC213 Recommended diameter for attachment bolts, mm 16 mm Bearing Type Extended inner race with set screws Recommended diameter for attachment bolts, inch 0.625 in A 50 mm T min. -20 °C Product weight: 5.35 kg T max. 100 °C Material Cast iron housing, chrome steel bearing s1 32.55 mm Dynamic Load Rating (Cr) 57.2 kN S 25.4 mm Static Load Rating (Cor) 40 kN RG 19.700 mm Fatigue load limit 1.7 kN R1 34.5 mm UCF213 Bearing Features UCF or SF Series 4 Bolt Square Cast Iron Housings: Bearing units supplied with a fully sealed bearing insert fitted in the cast iron housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted. The inserts (available separately) can be removed from the housings for future replacement as required Benefits: Cost-effective bearing/housing assembly, re-lubricate, replaceable insert, grub screw fixing Pillow Block Bearing Pillow block bearing consists of an outer spherical ball bearing with seals on both sides and a cast (or stamped steel plate) bearing seat. The internal structure of a seated outer spherical ball bearing is the same as that of a deep groove ball bearing, but the inner ring of this type of bearing is wider than the outer ring.