Vertical Milling Machine
Vertical Milling Machine
Technical Features
| MODEL | 1 No. | 1 1/2 No. | 2 No. | 3 No. | 4 No. | |||||
| TABLE | Inch | MM | Inch | MM | Inch | MM | Inch | MM | Inch | MM |
| Face of Body | 9" | 230 | 10" | 254 | 11" | 280 | 12" | 300 | 15" | 381 |
| Working Surface | 9"x40" | 230x1015 | 10"x48" | 254x1220 | 11"x51" | 280x1295 | 12"x54" | 300x1371 | 13"x80" | 330x1524 |
| Size of T-Slots & Number | 1/2\\\'\\\' =3 | 12=3 | 1/2" =3 | 12=3 | 1/2" =3 | 12=3 | 1/2" =3 | 12=3 | 5/8=3 | 16=3 |
| Cross | 6" | 150 | 7" | 177 | 10" | 254 | 12" | 304 | 14" | 355 |
| Vertical | 12" | 304 | 15" | 380 | 18" | 457 | 24" | 609 | 30" | 762 |
| Longitudinal Automatic | 20" | 508 | 24" | 609 | 26" | 660 | 30" | 762 | 36" | 915 |
| Table Rotation Side to Side | 45o-0-45o | 45o-0-45o | 45o-0-45o | 45o-0-45o | 45o-0 45o | |||||
| SPINDLE | ||||||||||
| Standard Arbour | 1" | 25.4 | 1" | 25.4 | 1 | 25.4 | 1" | 25.4 | 1" | 25.4 |
| Taper of Spindle | ISO-40 | ISO-40 | ISO-40 | ISO-40 | ISO-40 | |||||
| No. of spindle speed | 9 | 9 | 9 | 9 | 9 | |||||
| Range fo spindle speed R.P.M. | 45 to 750 | 45 to 750 | 45 to 750 | 45 to 750 | 45 to 750 | |||||
| No. of Feed (Longitudinal) | 3 S-F-M. | 3 S-F-M. | 3 S-F-M. | 3 S-F-M. | 3 S-F-M. | |||||
| Motor Required H.P. & R.P.M. | 2 H.P. | 1440 | 2 H.P. | 1440 | 3HP | 1440 | 3HP | 1440 | 5HP | 1440 |
| No. of Tool Post | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | |
| Cutting Speed P.M. | Inch. | 410 | 410 | 410 | 410 | 410 | 410 | 410 | 410 | 410 |
| H.P. Required | 2 | 2 | 3 | 3 | 5 | 5 | 5 | 5 | 7.5 | |
| Appox. Wt. in Qtls. | 35 | 40 | 50 | 60 | 70 | 85 | 88 | 105 | 125 |
