Planno Miller
Planno Miller
Technical Specifications
| Length of Stroke in Feet |
6ft. to 40ft. (1800mm to 12000mm) as per order. |
|||||||
| Width between columns |
3ft |
4ft |
4.5ft |
5ft |
5.5ft |
6ft |
7ft |
8ft |
| Capacity (in mm) |
||||||||
| Width between columns |
900 |
1220 |
1372 |
1524 |
1676 |
1828 |
2133 |
2430 |
| Height under cross rail max |
900 |
1220 |
1372 |
1524 |
1676 |
1828 |
1828 |
1828 |
| Table |
||||||||
| Working Length |
As per length of stroke |
|||||||
| No. of T-slots |
5 |
5 |
5 |
6 |
6 |
6 |
7 |
7 |
| Width of T-slots |
19 |
19 |
19 |
19 |
19 |
19 |
19 |
19 |
| Distance between T-Slots |
127 |
127 |
148 |
148 |
149 |
190 |
190 |
190 |
| Milling Heads |
||||||||
| No. of Milling Heads |
One, Two or Three As per Order |
|||||||
| Horizontal Transverse of one Milling Head on Cross Rail | 900 |
1200 |
1300 |
1500 |
1600 |
1800 |
2100 |
2400 |
| Max. Swivef of Milling Had to either side |
+- 50o |
+- 50o | +- 50o | +- 50o | +- 50o | +- 50o | +- 50o | +- 50o |
| Cross Rail |
||||||||
| Vertical traverse of cross rail mm (elevating) |
850 |
1200 |
1300 |
1500 |
1600 |
1800 |
1850 |
1850 |
| Elevating Traverse of side Milling Head |
600 |
850 |
1000 |
1150 |
1300 |
1400 |
1450 |
1450 |
| Milling Heads: |
General Duty |
Heavy Duty |
Extra Heavy Duty |
| No of Speeds |
6 |
6 |
6 |
| Range of Speeds in RPM |
50 To 440 RPM |
50 To 440 RPM | 50 To 540 RPM |
| Motor 3 Phase 440 Volts |
3 H.P/1440 RPM |
5 H.P/1440 RPM | 10 H.P/1440 RPM |
| Spindle Dia at Nose. |
85 mm |
128 mm |
140 mm |
| Vertical traverse of Quill. |
70 mm |
100 mm |
100 mm |
| Vertical traverse operation. |
Manual |
Manual |
Manual |
| Micro feed Manual |
0.05 mm |
0.05 mm | 0.05 mm |
| Feed of Table for Milling |
30 mm to 200 mm per minute |
30 mm to 200 mm per minute | 30 mm to 200 mm per minute |
| Cutter Dia |
80 mm to 100 mm |
120 mm to 150 mm |
250 mm to 300 mm |
| Spindle Nose Taper |
ISO - 40 |
ISO - 50 |
ISO - 50 |
| Holding of Cutter |
By Draw Bold |
Either by draw bolt/bar or bolts on spindle noise |
