Roll Turning Lathe Machines
Roll Turning Lathe Machines
Technical Features
| Specifications | - | - | - | - | - | - | - |
| Length of Bed (mm) | 3000 | 3500 | 4500 | 5000 | 6000 | 7500 | 9000 |
| Width of Bed (mm) | 450 | 500 | 500 | 500 | 500 | 650-1625 | 650-1625 |
| Height of Centre (mm) | 400 | 445 | 445 | 460 | 460 | 525-1400 | 525-1400 |
| Spindle Hallow (mm) | 80 | 90 | 90 | 105 | 115 | 130 | 130 |
| Total Width of Gap (mm) | 380 | 510 | 510 | 510 | 510 | 600 | 600 |
| Width-of Gap in front of face plate (mm) | 280 | 410 | 460 | 460 | 460 | 510 | 510 |
| Swing over Saddle (mm) | 600 | 660 | 660 | 690 | 690 | 760-2250 | 760-2250 |
| Swing in Gap (mm) | 1325 | 1525 | 1525 | 1575 | 1575 | 1675-3250 | 1675-3250 |
| Admit between Centre (mm) | 1600 | 2000 | 3000 | 3000 | 4000 | 5000 | 6000 |
| Admit between Centre (mm) | 55 | 60 | 65 | 65 | 65 | 65 | 70 |
| Feed Shaft Dia (mm) | 30 | 30 | 30 | 35 | 38 | 40 | 40 |
| 30 30 30 35 38 40 40 | 3 | 4 | 45 | 5 | 7 | 08/15/08 | 10/20/08 |
| 7.5 | 3 | 5 | 5 | 5 | 5 | 7.5 | 7.5 |
