We are one of the major Y Type Strainer Manufacturers, Exporters, and Suppliers in India. Y Type Strainer takes their name from their configuration. Y Type Strainer are most commonly used in pressurized lines, gas or liquid, but can also be used in suction or vacuum conditions. Y Type Strainer are intended for applications where small amounts of solid particulate are expected, and where clean-out will be infrequent. If solids will flush easily from the screen, and fluid can be exhausted to atmosphere, a blow-down valve on the drain port will allow clean-out without removal of the screen, and without interrupting the process flow.

 

Applications :

Pump protection

Flow meter protection

Protection of steam traps

Valve and regulator protection

Protection of heat exchanger and refrigerating set

Instrumentation and ancillary piping item protection

 

Technical Specifications :

Material of construction Housing : Carbon steel, Stainless steel in various grades, - Other materials and coatings available on request

Filter Element : Carbon steel, Stainless steel in various grades - Other materials available on request. 

End connection : Flanged (As per requested Table.), Threaded (NPT or BSP)

Sizes : Sizes are available from 1/2" Line size to 24" Line size. Other/Higher sizes available on request

Filtration rating : Filtration rating available from 1 micron to 1000 microns

Pressure rating : Up to 1000 PSI. High-pressure ratings available on request