Curing Tank

Curing Tank 24 Hour cycle from time of mixing. - Controlled 35oC or 100oC ±2oC Curing Temperature for concrete. - Controlled 27oC ± 2oC Curing Temperature for grey cement. The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oC or 100oC ± 2oC / 27oC 2oC , expect for the 15 minutes after immersion of the freshly made specimens. Salient Features Curing Tank for 6/12 moulds of 150mm / 70.6mm size Curing Tank for 12/24 moulds of 150mm / 70.6mm size Taag: Curing Tank Manufacture in Chennai Curing Tank Manufacture in Tamilnadu, Curing Tank Manufacture in Chennai, Curing Tank Manufacture in Kanchipuram, Curing Tank Manufacture in Tiruvallur, Curing Tank Manufacture in Cuddalore, Curing Tank Manufacture in Villupuram, Curing Tank Manufacture in Vellore, Curing Tank Manufacture in Tiruvannamalai, Curing Tank Manufacture in Salem, Curing Tank Manufacture in Namakkal, Curing Tank Manufacture in Dharmapuri, Curing Tank Manufacture in Erode, Curing Tank Manufacture in Coimbatore, Curing Tank Manufacture in The Nilgiris, Curing Tank Manufacture in Thanjavur, Curing Tank Manufacture in Nagapattinam, Curing Tank Manufacture in Tiruvarur, Curing Tank Manufacture in Tiruchirappalli, Curing Tank Manufacture in Karur, Curing Tank Manufacture in Perambalur, Curing Tank Manufacture in Pudukkottai, Curing Tank Manufacture in Madurai, Curing Tank Manufacture in Theni, Curing Tank Manufacture in Dindigul, Curing Tank Manufacture in Ramanathapuram, Curing Tank Manufacture in Virudhunagar, Curing Tank Manufacture in Sivagangai.