Arduino Original Board UNO with Cable

Arduino Original Board UNO with Cable The best board to get started with electronics and coding. Overview: The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. You can tinker with your UNO without worrying too much about doing something wrong. \\\"Uno\\\" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. Features: · The Uno is open-source hardware! You can build your own board. · The Uno board can be powered via the USB connection or with an external power supply. The power source is selected automatically. · The Uno has a number of facilities for communicating with a computer, another Uno board, or other microcontrollers. · The Uno can be programmed with the Arduino Software (IDE). Technical Specifications: Microcontroller ATmega328P Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz Length 68.6 mm Width 53.4 mm Weight 25 g Need Help? · On the Software on the Arduino Forum · On Projects on the Arduino Forum · On the Product itself through Arduino Customer Support