PE1200*1500 Jaw Crusher for Sale in Gold To Angola
PE1200*1500 Jaw Crusher for Sale in Gold To Angola
Working Principle of Jaw Crusher:
A Jaw Crusher is one of the main types of primary crushers in a mine or ore processing plant. The size of a jaw crusher is designated by the rectangular or square opening at the top of the jaws (feed opening). For instance, a 24 x 36 jaw crusher has a opening of 24" by 36", a 56 x 56 jaw crusher has a opening of 56" square. Primary jaw crushers are typically of the square opening design, and secondary jaw crushers are of the rectangular opening design. However, there are many exceptions to this general rule.
A Jaw Crusher reduces large size rocks or ore by placing the rock into compression. A fixed jaw, mounted in a "V" alignment is the stationary breaking surface, while the movable jaw exerts force on the rock by forcing it against the stationary plate. The space at the bottom of the "V" aligned jaw plates is the crusher product size gap, or the size of the crushed product from the jaw crusher. The rock remains in the jaws until it is small enough to pass through the gap at the bottom of the jaws.
Application of Jaw Crusher:
1) They are widely used in the works of mine, smelting, building materials, road, railway, irrigation, chemical industry, etc.
2) The crusher is applicable for the rough and medium crushing of rocks and ores with a compressive strength less than 320MPA. It is the preferred equipment of primary crushing.
Features of Jaw Crusher:
1) high crushing ratio and equal product granularity;
2) simple structure and reliable working condition;
3) convenient maintenance and economical operation.
Jaw Crusher Structure:
1) Frame
2) Jaw plate and side guard plate
3) Transmission part: eccentric shaft
4) Adjustment device
5) Flywheel
6) Lubrication device
Technical parameters:
Model |
Feed Opening size (mm) |
Max. feeding size (mm) |
Adjusting range of discharge opening (mm) |
Capacity ( t/h ) |
Rotation speed of eccentric shaft ( r/min ) |
Motor power ( KW ) |
Dimensions (L×W×H) ( mm ) |
PE-150×250 |
150×250 |
125 |
10-40 |
1-3 |
250 |
5.5 |
720×660×850 |
PE-200×300 |
200×300 |
180 |
15-50 |
2-6 |
260 |
7.5 |
910×750×990 |
PE-200×350 |
200×350 |
180 |
18-70 |
3-10 |
260 |
11 |
1000×870×990 |
PE-250×400 |
250×400 |
210 |
20-60 |
5-20 |
300 |
15 |
1300×1090×1270 |
PE-400×600 |
400×600 |
340 |
40-100 |
16-60 |
275 |
30 |
1730×1730×1630 |
PE-500×750 |
500×750 |
425 |
50-100 |
40-110 |
275 |
55 |
1980×2080×1870 |
PE-600×750 |
600×750 |
500 |
150-200 |
80-240 |
275 |
55 |
2070×2000×1920 |
PE-600×900II |
600×900 |
500 |
65-160 |
50-180 |
250 |
55 |
2190×2206×2300 |
PE-750×1060 |
750×1060 |
630 |
80-140 |
110-320 |
250 |
110 |
2660×2430×2800 |
PE-800×1060 |
800×1060 |
640 |
130-190 |
130-330 |
250 |
110 |
2710×2430×2800 |
PE-830×1060 |
830×1060 |
650 |
160-220 |
150-336 |
250 |
110 |
2740×2430×2800 |
PE-870×1060 |
870×1060 |
660 |
200-260 |
190-336 |
250 |
110 |
2810×2430×2800 |
PE-900×1060 |
900×1060 |
685 |
230-290 |
230-390 |
250 |
110 |
2870×2420×2940 |
PE-900×1200 |
900×1200 |
750 |
95-165 |
220-450 |
200 |
110 |
3380×2870×3330 |
PE-1000×1200 |
1000×1200 |
850 |
195-265 |
315-500 |
200 |
110 |
3480×2876×3330 |
PE-1200×1500 |
1200×1500 |
1020 |
150-350 |
400-800 |
180 |
160 |
4200×3300×3500 |
PE-1500×1800 |
1500×1800 |
1200 |
220-350 |
500-1000 |
180 |
280 |
5160×3660×4248 |
PE-1800×2100 |
1800×2100 |
1500 |
300-400 |
600-1200 |
160 |
400 |
6210×4013×4716 |
PEX-150×750 |
150×750 |
120 |
18-48 |
8-25 |
320 |
15 |
1200×1530×1060 |
PEX-250×750 |
250×750 |
210 |
25-60 |
13-35 |
330 |
30 |
1380×1750×1540 |
PEX-250×1000 |
250×1000 |
210 |
25-60 |
16-52 |
330 |
30 |
1560×1950×1390 |
PEX-250×1200 |
250×1200 |
210 |
25-60 |
20-61 |
330 |
37 |
2140×1660×1500 |
PEX-300×1300 |
300×1300 |
250 |
20-90 |
16-105 |
300 |
55 |
2720×1950×1600 |
Technical parameters are subject to change without notice.
Jaw Crusher Pictures:
Jaw Crusher Processing Plant:
Jaw crushing plant:
For more products, please view our website: www.zdzg.cn
Working Principle of Jaw Crusher:
A Jaw Crusher is one of the main types of primary crushers in a mine or ore processing plant. The size of a jaw crusher is designated by the rectangular or square opening at the top of the jaws (feed opening). For instance, a 24 x 36 jaw crusher has a opening of 24" by 36", a 56 x 56 jaw crusher has a opening of 56" square. Primary jaw crushers are typically of the square opening design, and secondary jaw crushers are of the rectangular opening design. However, there are many exceptions to this general rule.
A Jaw Crusher reduces large size rocks or ore by placing the rock into compression. A fixed jaw, mounted in a "V" alignment is the stationary breaking surface, while the movable jaw exerts force on the rock by forcing it against the stationary plate. The space at the bottom of the "V" aligned jaw plates is the crusher product size gap, or the size of the crushed product from the jaw crusher. The rock remains in the jaws until it is small enough to pass through the gap at the bottom of the jaws.
Application of Jaw Crusher:
1) They are widely used in the works of mine, smelting, building materials, road, railway, irrigation, chemical industry, etc.
2) The crusher is applicable for the rough and medium crushing of rocks and ores with a compressive strength less than 320MPA. It is the preferred equipment of primary crushing.
Features of Jaw Crusher:
1) high crushing ratio and equal product granularity;
2) simple structure and reliable working condition;
3) convenient maintenance and economical operation.
Jaw Crusher Structure:
1) Frame
2) Jaw plate and side guard plate
3) Transmission part: eccentric shaft
4) Adjustment device
5) Flywheel
6) Lubrication device
Technical parameters:
Model |
Feed Opening size (mm) |
Max. feeding size (mm) |
Adjusting range of discharge opening (mm) |
Capacity ( t/h ) |
Rotation speed of eccentric shaft ( r/min ) |
Motor power ( KW ) |
Dimensions (L×W×H) ( mm ) |
PE-150×250 |
150×250 |
125 |
10-40 |
1-3 |
250 |
5.5 |
720×660×850 |
PE-200×300 |
200×300< Send EnquiryIf You Need Any Solution.....We Are Available For You |