Teflon Coated Fiberglass Belts

This open mesh PTFE impregnated fiberglass belting is available in brown and black in widths up to 3950mm and in any length. The fluorocarbon resins used in the curing process are chemically inert, and the woven glass substrate provides exceptional strength and dimensional stability. Its non-stick surface, operating temperature range from –60 C to +260 C and the 70% open area makes this belting the perfect solution for many drying applications.

Benefits Of PTFE / Teflon coated Fiberglass Belts.
$\\\"\\\"$
Energy Savings	PTFE/Glass Belts prove better heat transfer and absorb less energy.
Maintenance Costs	PTFE/Glass Belts have non-stick surface and are easy to clean.
Cost	PTFE/Glass Belt costs less to purchase. Its low relative mass allows it to function in a simpler, less expensive pulley and drive systems
Sizes Available:	LT 3NP, LT 5NP, LT 6NP, LT 10NP, LT 14NP, LT 22NP

Features

Operating Temperature range -50°C to 260°C
Smooth release Non-Sticky Surface
Dimensionally Stable
Resistance to most chemicals and solvents
Non Flammable
Non Toxic
With or without Buttons
With Eyelets
Two Ply Laminated Belt
Edge Reinforcement
Tracking Devices
5NP, 10 NP, 14 NP, 22 NP etc…

Types Of Joints

Heat sealed overlap
Heat-Sealed Butt
Finger – Splice
Fabric Pin Splice
Alligator Splice
Porous Overlap Splice
Leno Splice (Porous)
Smart Loop (Bull nose) Splice
Peek Spiral Splice

Applications

Two Ply belt for heat sealing of plastics pouches in continuous band sealer for higher rate of production.
In Garment Industries for fusing of collar and cuffs.
To wrap and side sealing of soaps, biscuits and toilet paper rolls.
For continuous drying oven to dry textile materials.
For food industries.
For continues lamination of non-woven material.

Send Enquiry