| 1. LS SM-15/SS-01 SUNDYNE SEAL |
| Construction of seal : |
| Face Seal :- Carbon, Tungsten Carbide |
| Metal parts :- SS 316, SS 304, Duplex Stinless Steel |
| Secondary seal :- Elastomers, PTFE, GFT |
| Operating Limits : |
| Pressure : 20 bar (max) |
| Temperature : -45...+180°C |
| Shaft speed : 25000 RPM. |
| Seal Characteristics : |
| Single acting |
| Inside Mounted |
| Independent of Direction of Rotation |
| High Speed |
| Balanced |
| Applications : |
| Refineries |
| Sundyne Pumps |
| Sunflow Pumps |
| Notes : STANDARDS :- As per customer\\\'s Drawings and specifications. |
| 2. LS SM-15/SS-02 SPLIT SEAL (DRY RUNNING) |
| Construction of seal : |
| Face Seal :- Carbon, Silicon Carbide, Ceramic |
| Metal parts :- SS 316, SS 304 |
| Secondary seal :- Elastomers |
| Operating Limits : |
| Pressure : 15bar (max) |
| Temperature : Amb…+140°C |
| Shaft speed : 3600 RPM |
| Seal Characteristics : |
| Easy to install |
| Fully Split Components |
| Balanced Seal Faces |
| Applications : |
| Agitator & Vessels (Dry Running Seal) |
| Utility Pumps |
| Trasfer Pumps |
| Notes : STANDARDS :- As per customer\\\'s Drawings and specifications. |
| 3. LS SM-15/BF-03 BOILER FEED WATER SEAL |
| Construction of seal : |
| Face Seal :- Carbon, Silicon Carbide |
| Metal parts :- SS 316, SS 304 |
| Secondary seal :- Elastomers |
| Operating Limits : |
| Pressure : 50…130 bar (max) |
| Temperature : -20…+230°C |
| Shaft speed : < 50 m/sec |
| Seal Characteristics : |
| Single acting |
| Balanced |
| Inside Mounted |
| Dependent of Direction of Rotation. |
| Applications : |
| Boiler Feed Water Pumps |
| Booster Pumps |
| Drip pumps |
| HSD Pumps |
| Condensate Pumps |
| Fuel Pumps |
| Notes : STANDARDS :- As per customer\\\'s Drawings and specifications |
| 4. LS SM-15/WS-04 WET RUNNING SEAL |
| Construction of seal : |
| Face Seal :- Carbon, Silicon Carbide |
| Metal parts :- SS 316, SS 304, Hastelloy-B, Hastelloy-C, Monel, Alloy-20 |
| Secondary seal :- Elastomers, TCV |
| Operating Limits : |
| Pressure : Vacuum…8bar (max) |
| Temperature : Amb…+160°C |
| Shaft speed : 320 RPM |
| Seal Characteristics : |
| Outside Mounted |
| Single acting |
| Reverse Balanced |
| Independent of Direction of Rotation |
| Without Bearing |
| Applications : |
| Corrosive Chemicals |
| General & Light Chemicals |
| Hydrocarbons |
| Notes :- |
| STANDARDS :- As per customer\\\'s Drawings and specifications. |
