Writer module JMY622

Writer module JMY622

JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY622 adopts surface mount installation form. Small size is a major feature of JMY622. JMY622 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY622 is that it can support contactless IC cards(T=CL) fully. It can send and receive more than 256 Bytes APDU commands and also support FSDI=8.

  • Qualifications:
  • PCD: NXP SL RC400, NXP MF RC500, NXP MF RC531, NXP CL RC632
  • Working frequency: 13.56MHz
  • RF standard: ISO14443A, ISO14443B, ISO15693
  • Operating distance: 100mm(depending on card and antenna design)
  • • Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
  • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
  • Auto detecting card: Supported, default OFF; Can be set.
  • Interface: IIC, UART(selected by SPS pin, recommend to use IIC)
  • Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
  • Max.command length: 511 Bytes
  • Interface level: 3.3V (TTL level; 5V tolerance)
  • Power supply: DC 3.3V + 5V(±0.5V)
  • Power consumption: 100mA
  • Dimension: 22mm×35mm
  • Package: Surface Mount
  • Weight: about 10g
  • Operating temperature: -25 ~ +85 ¡æ (-77 ~ +185°F)
  • Storage temperature: -40 ~ +125 ¡æ (-104 ~ +257°F)
  • ISP: Supported
  • RoHS: Compliant
  • SDK&Program: download
  • Manual: download
Model NO. JMY622A JMY622C JMY622G JMY622H JMY622D JMY622E JMY622F
Manual Download Download Download Download Download Download Download
Dimension 22mm*35mm
Interface IIC&UART(selected by SPS pin, recommend to use IIC)
Max.command length 254 Bytes 511 Bytes
Antenna connection Separate, 50ohm coaxial cable
MCU C8051F921
PCD RC500 RC531 RC400 RC632 RC500 RC531 RC632
RF Standard ISO14443A
ISO14443A
ISO14443B
ISO15693
ISO14443A
ISO14443B
ISO15693
ISO14443A
ISO14443A
ISO14443B
ISO14443A
ISO14443B
ISO15693
Reading distance 100mm
PICC

 

Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
 
 

 

Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
AT88RF020
T=CL TYPE B
 

 

NXP I.CODE SLI
TI Tag_it HF-I
ST LRI
 
 
 
 
 
 
 
 
 
 
 

 

Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
AT88RF020
T=CL TYPE B
 
NXP I.CODE SLI
TI Tag_it HF-I
ST LRI
 

 

Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
 
 
 
 
 
 
 
 
 
 
 

 

Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
AT88RF020
T=CL TYPE B
 
 
 

 

Mifare 1K
Mifare 4K
FM11RF08
Ultralight
Ultralight C
Mifare Mini
DesFire
Mifare ProX
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
AT88RF020
T=CL TYPE B
 
NXP I.CODE SLI
TI Tag_it HF-I
ST LRI
 
 

 

 

If You Need Any Solution.....We Are Available For You

Home
Products
Whats App
Contact Us