Aero (Vertex VXA 300 Pilot III NAV COM Transceiver)

Aero (Vertex VXA 300 Pilot III NAV COM Transceiver)

 

The VXA-300 boasts 0.8 Watt of clean audio output from its 1.4" (36-mm) diameter loudspeaker, and it also provides 8.33 kHz synthesizer steps for the receiving of the new narrow-band channel plan. The VXA-300 includes both Temperature and Supply Voltage displays with our exclusive Omni-GlowTM display back-lighting for minimal degradation of your night vision, NOAA weather band monitoring, 8-character Alpha/Numeric Display, 150 Memory Channels, and up to 100 "Book Memory" Channels.  The channel configurations are can be easily reprogrammed in minutes using the optional PC Programming Kit and your PC.

Features:

Ultra Rugged, Submersible Case Construction

The Pilot III is built inside a rugged Aluminium case, carefully sealed to protect against water ingress. Built to survive immersion in water up to 30 minutes at a depth of three feet, Pilot III can keep you communicating even if gets wet if you have to ditch!

250 Memory Channels

The 150 regular memory channels and 100 preprogrammed "Book" memory channels can store just about any commonly-used operating frequencies that you choose. And the memories may be labeled with an Alpha-numeric title of up to 8 characters, for easy recognition.

Noaa Weather Channels (U.S.A. Only)

The Pilot III can receive all 10 NOAA weather broadcast frequencies. The Automatic Active Weather Channel Locator (a Vertex Standard exclusive) automatically scans for active NOAA weather stations in your area when WX band is selected.

Other Features
  • Automatic Noise Limiter
  • Ambient Temperature monitor
  • One-Touch Squelch (Monitor) Control
  • External DC Jack (12V)
  • Battery Voltage Display
  • 8.33 or 25 kHz Channel Steps
  • Stop Watch and Count Down Timers
  • Easy-to use Menu System for Custom Configuration
  • PC Programmable
Receiver Audio Pitch Control

For improved reception under difficult conditions, the receiver\'s audio frequency response may be quickly adjusted by the user, to enhance either the high-frequency or low-frequency components, depending on the noise and/or interference encountered. A Vertex Standard exclusive!

One Touch Squelch Control

Breaking the squelch threshold has never been easier. Press the monitor (MON) button for two seconds to open the Pilot III\'s squelch continuously. Press MON again to restore the original squelch settings. This is TRUE one- handed operation, without the need to fumble around with tightly spaced concentric knobs.
   

If You Need Any Solution.....We Are Available For You

Home
Products
Whats App
Contact Us