Masonry Wall Reinforced Mesh

Masonry Wall Reinforced Mesh Has Good tenacity, Corrosion Resistance A truss mesh is placed on the concrete brick wall. MWRM-1: Masonry wall reinforced mesh is ideal for concrete wall construction. Masonry wall reinforced mesh, also called masonry mesh, is used for concrete constructions to strengthen the structure. It is widely used in concrete wall reinforcing to prevent or reduce the cracking of the wall. And our products can increase the strength of your wall without increasing the thickness. Our masonry wall reinforced mesh with high tensile strength and good tenacity can be bent without damaged. T shaped masonry wall reinforced mesh is suitable for corner construction. In addition, our masonry mesh products with galvanized surface treatment are not easy to be corroded and rusted in the concrete constructions. It has long service life. We provide ladder mesh, truss mesh and T shape masonry mesh mainly. We also have expanded metal mesh as masonry wall reinforced mesh. Truss Mesh & Ladder Mesh This is a ladder mesh reinforcement. MWRM-2: Ladder mesh reinforcement This is a truss mesh reinforcement. MWRM-3: Truss mesh reinforcement This is a T shaped masonry mesh. MWRM-4: T shape masonry mesh Material: low carbon steel, stainless steel. Surface treatment: Welded after hot dipped galvanized. Welded after electro galvanized. Welded before electro galvanized. Welded before hot dipped galvanized. Welded by stainless steel wire. Wire diameter: 2.0–6.0 mm. Width: 50 mm, 100 mm, 150 mm, 200 mm. Length: 3 m. Type: Ladder mesh reinforcement. Truss mesh reinforcement. T shape masonry mesh. Standard: ASTM A641 (Electro galvanized ) ASTM A153 Class B2 (Hot dipped after fabrication) ASTM A 82 (Cold drawn steel wire) ASTM A951-96 (Masonry wall reinforcing) ASTM 580 Type 304 (Stainless steel) Table 1: Masonry Wall Reinforced Mesh Specifications Item Standard Length Width Finishes WRMS-1 10' (3.05 m) 2" (50 mm).