Breakout Board
Breakout Board
BREAKOUT BOARDAll independent inputs, opto-isolated and fully buffered parallel port breakout board designed for controlling CNC machines from PC based controller like Mach3, Turbo CNC, EMC2, KCAM etc.Features are introduced here: •All buffered outputs are taken out to screw terminals. •All the inputs are optoisolated, filtered for noise immunity and buffered. •An on board charge pump for safety is provided. •All inputs and outputs like Estop, charge pump, relays can be reclaimed and used for any purpose by merely changing the position of jumpers. •On board rectifier and filter, accepts 9V to 15V AC or DC input for power. •On inputs, both terminals of optoisolator are connected to screw terminals, providing flexible connection to source / sink type inputs and with external series resistor can take from 5V to 24V inputs. •26 pins FRC as well as DB 25 connector for interfacing purpose. •For enabling the hardware salvage of 2 motors on one axis for gantry style machines; one axis outputs i.e. step and dir are buffered twice and taken out control box to terminals. •For spindle and auxiliary on-off control, an on board relay is given improving flexibility further. •Handmade high quality, low resistance, shielded male-to-male parallel port cable included in the package. •LED indicators provided - Power ON, Estop OK, Relay ON and Charge pump OK signals. •Made in India.
Send Enquiry
