Forced Lubrication System

Uses:

This high pressure rotory gear pump is used for fuel pressuring application, hydraulic application & lube oil pressuring application in Steel Plants, Thermal Power Plants & Refineries. Instead of bush bearing needle roller bearing can also be provided. The pump is normally fitted with gland packing with "Z" pack sealant & teflon-graphite gland.

AVAILABLE MODEL - SIZE - CAPACITY.

Model	Size	Capacity
Model	Size	M3 / hr.	LPM
GDH-040	³/₈" X ³/₈"	0.75	12.5
GDH-050	¹/₂" X ¹/₂"	1.00	16.2
GDH-075	³/₄" X ³/₄"	2.00	33.5
GDH-100	1" X 1"	3.00	50.0
GDH-125	1¹/₄" X 1¹/₄"	5.00	63.5
GDH-150	1¹/₂" X 1¹/₂"	6.00	100.0
GDH-150	1¹/₂" X 1¹/₂"	7.50	125.0

Capacity upto 7. 5 M3/hr. Pressure upto 35 kg/cm2.

Material of Construction

No.	ITEM	Qty.	Material.
1	CASING.	1	C.S. Gr. WCB.
2	FRONT COVER.	1	C.S. Gr. WCB.
3	BACK COVER.	1	C.S. Gr. WCB.
4	ROTOR SHAFT.	2	EN - M9.
5	ROTOR GEAR.	2	EN-9
6	WEAR PLATE CUM BUSH.	4	BRONZE.
7	GLAND COVER.	1	C.S. Gr. WCB9.
8	SEAL COVER.	1	C.S. Gr. WCB.

Model	Dimensions.
Model	A	B	C	D	E	F	G	H	I	J	K	L1	L2	L3	M	N	S	ØD	ØD1	PQ
40 / 50 / 75	175	95	42.5	35	20	5	75	150	45	114	97.5	68	86	12	6	6	20.5	18	9	¹/₄" BSP
100 / 125	198	116	52	45	20	5	86	180	50	140	110	88	115	17	6	6	22.5	20	11	1" BSP
150	235	134	60	55	20	5	105	200	65	160	127.5	106.5	139	22	8	8	31	28	11	1¹/₂" BSP