Smoke point tester for kerosene
Smoke point tester for kerosene
Scope of application Accord with GB/T382-83 and ASTM D1322, Smoke Point Tester is used to test smoke point of kerosene and jet fuel in a standard lamps and lanterns, to measure maximum height of smokeless flame in burning conditions Function characteristics 1,Sample combustion in the standard lamp, flame height changes reflected on the mm scale background 2,The structure of the instrument is compact andintegrity 3,No circuit element 4, Repeatability of determination results is much Higher. Technical parameters 1, Scale:should be in white on the black glass.Its central 2 mm of white or black stripes will stick vertically divides scale into two parts.Measurement range is 50mm,1mm for scale division, marked each10mm with number, and long line for each 5mm. 2, Wick catheter:FRIEND should be accurately with zero on the scale at the same level 3, Lifting seat: total distance is less than 10 mm, moves smoothly and evenly 4,oil container:consist of oil container ontology,lamp wick tube andair conduit. Inside dimension of oil container ontology is 21.25±0.05, length109.0±0.05;inner diameter of lamp wick tube 4.7±0.05,length82.0±0.05;inner diameter of air conduit is 3.5±0.05,length90.0±0.05.
Send Enquiry
