NYLON- 6 $ 66

 We are making Nylon Glassfibre filled, Nylon mineral filled, lubricated Nylon as per specific needs of the customer. Our Polyamides (Nylon) are superior in their properties and cost compared to similar others in the field. We prefer to use Roving fibre/direct fibre instead of short fibre/chopped fibre to ensure better flexural strength.

Nylon 6 is a tough, abrasion-resistant material. It has improved surface appearance, creep resistance, and processability compared to nylon 6/6. It also can be molded about 30 degrees C lower with less mold shrinkage because it is slightly less crystalline. Adversely, nylon 6 has a lower modulus and absorbs moisture more rapidly than nylon 6/6. Moisture acts as a plasticizer, reducing tensile strength and stiffness and increasing elongation. But, while absorbed moisture reduces many properties, nylon owes part of its toughness to the plasticizing effect of moisture. As moisture content rises, significant increases occur in impact strength and general energy absorbing characteristics. Properly recognized and accounted for, the effect of moisture on the processing and properties of nylon need not be of great concern.