Fume Hood

Fume Hood Consist of: * The Fume Hood Cabinet is made up of thick ply board & armored with teak wood whatever necessary interiors coated with asbestos sheets, coated with epoxy paint or convert FRP lining as per requirements. * Working table is covered with glazed ceramic tiles and provided with necessary water inlet & outlets with sink (stainless steel). Provision of water inlet/outlet, sink will be on request only. * Front door is made of 6mm clear glass in laminated teakwood frame and connected with a counter weight balance through a nylon rope. The door will have the provision of vertical sliding facility. * Exhaust blower consists of single phase motor, directly connected with a PVC Exhaust blower consists of single phase motor, directly connected with a PVC impeller and enclosed in a epoxy coated MS casing. The rating, speed & capacity of the Blower sill are designed on the basis of the SIZE & VOLUME of the FUME HOOD. * However the suction velocity of the FUME HOOD will be around 100 CFM per square feet. * The exhaust assembly can be of build-in-type or external mount type. The blower assembly will directly be connected with suitable exhaust ducting, which is made of PVC pipes with suitable bend & joints and rain guard. * Chemical & Fire resistant Phenolic Resin Lining inside the Chamber * Different choice of worktops suitable for a wide range of applications (S.S/ GRANITE/TILES) * Clear tempered safety glass sash utilizes counter weights for smooth and effortless operations. Options : * Compact Ductwork System with Exhaust Fan * Fume Scrubber * Wash-Down System * Electrical Wiring * Solvent Storage Base Cabinet * Acid Storage Base Cabinet * Fire Proof Tiles