BCF series Backwashable PP Pleated Water Cartridge Filters

Description Backwashable PP Pleated Cartridges are mainly designed for power plant condensed water filtration. PP Filter media of backwashable pleated cartridges are available in absolute ratings ranging from 1 to over 100 microns to meet the removal requirements of each individual condensate system. Like all the condensate filter cartridges from Hongtek, a variety of end fittings can be selected to retrofit the elements in existing power plant condensate filter systems. Feature 1. High surface area of superior pleated media, high dirt holding capacity 2. Wide range of chemical compatibility, long service life and economic cost 3. Less damage from iron and copper to the boiler and turbine of condensed system 4. Backwashable cartridges absolute micron rating, removal efficiency rated at 99.9% 5. Backwashable PP pleated cartridges designed for power plant condensed water filtration 6. Backwashable pleated cartridges can be backwashed to prolong life and easy to change out Applications 1.Electronics 2.Boiler Water 3.Cooling Water 4.Pre RO Filtration 5.Sea Water Desalination 6.Condensed Water Filtration 7.Power Plant Water Treatment Specification Filter Media:Polypropylene Length:60"(1524mm), 70"(1778mm) Outside Diameter:2.75"(70mm) Filtration Rating:1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 100μm Core:Polypropylene Support/Drainage:Polypropylene Gasket/O-ring:Silicone, EPDM, Viton, NBR End Cap/Cage:Polypropylene End Cap Type:DOE, 222/Flat, 222/Fin, 226/Flat, 226/Fin, 215/Flat, 215/Fin.