Joint Wrap Tape Coating System

Joint Wrap Tape Coating System

Pipe Wrap, Joint Coatings & Accessory Products

Xunda carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities.

Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe.

Coating repair: cold-applied tape products for plant and field repair of main line coating systems.

Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe.

Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints.

ROW construction: Rock shield system, tie-in, and above-ground tape systems for use at the job site by the pipeline contractor.

Offshore Tapes: Whether replacing PVC on welded joints or protecting Pier Pilings, Xunda has the tape coating for the job. 

Product

Uses & General Characteristics

Total
Thickness

Adhesion
to Primed Steel Pipe

Maximum
Temperature

1027

Solvent-based primer designed for brush, roller or spray application to mechanically cleaned pipe surfaces. Contains stress-corrosion cracking inhibitors.

 

N/A

N/A

100°C
212°F

910

All-purpose tape system for field application in the oil patch.

0.25 mm
10 mil

11 N/10 mm
100 oz/in

66°C
150°F

900

General utility tape for hand application on small diameter pipe, joints and fittings.

0.30 mm
12 mil

11 N/10 mm
100 oz/in

66°C
150°F

930(-35)

Heavy duty joint wrap tape for hand wrapping in applications where higher shear properties are required. Designed without release liner for less waste and ease of use.

0.89 mm
35 mil

25 N/10 mm
225 oz/in

66°C
150°F

932(-35)

Cold-applied tape system with an elevated high-tack adhesive. Provides excellent conformability when hand applied to field joints, fittings and specialty piping. EN/DIN B30 Qualified.

0.89 mm
35 mil

28 N/10 mm
250 oz/in

66°C
150°F

932(-50)

1.27 mm
50 mil

28 N/10 mm
250 oz/in

66°C
150°F

934(-35)

Cold-applied tape system with a high tack adhesive. Used as a patch/repair system and as the primary corrosion protection system on field joints, fittings and specialty piping.

0.89 mm
35 mil

28 N/10 mm
250 oz/in

66°C
150°F

934(-50)

1.27 mm
50 mil

35 N/10 mm
320 oz/in

66°C
150°F

939

100% solids mastic designed as a self-adhering filler material prior to overcoating with Polyken joint coating tape systems.

3.17 mm
125 mil

33 N/10 mm
300 oz/in

93°C
200°F

954

Mechanical protection layer for use with all of the Polyken joint wrap coating products. Easy hand or (outerwrap) (outerwrap) machine application.

0.38 mm
15 mil

N/A (outerwrap)

85°C
185°F

 

If You Need Any Solution.....We Are Available For You

Home
Products
Whats App
Contact Us