Wall Mounting Small Boxes Enclosures
Wall Mounting Small Boxes Enclosures
Features:
1) This is suitable for smaller size enclosures.
2) Better IP Protection(Up to IP67).
Parts of enclosure:
1) Welded body: The body of enclosure is closed from sides, rear, top & bottom in 1.5 / 2.00 thick folded CRCA sheet
2) Base: It is optional.
3) Front single /split / partial doors: Made in 2.00 thk CRCA sheet with support frame, sheet metal special hinge, cam locks.
4 Gland plate: At top or bottom in 2.00 thk CRCA.
5) Component mounting plate fC" Plate): 2.00/3.00 thk as per requirement size is (VV-55) x (H-55) mounting on welded bushes at rearmost position.
6) Wall mounting bracket: 4 no\\\\\\\\\\\\\\\'s wall mounting bracket (in 3.00 thick ) per enclosures.
7) 19" Rack: Din Standard 19" equipment mounting arrangement is possible.
8) 19"Swing frame: suitable for 19" mounting in width and height as per requirement.
Standard sizes of the enclosures:
Width |
Depth |
Height |
Base |
300 mm-800 mm (in pith of 100 mm) |
200 mm-600 mm (in pith of 50 mm) |
300 mm-1200 mm (in pith of 100 mm) |
As per requirement |
Send Enquiry