Drive PLC Automation Enclosures
Drive PLC Automation Enclosures
Sub-assemblies of Modular Frame Structures:
- Frame structure: Manufactured using 3.00 thick folded CRCA sheet with vertical and horizontal (depth) indexing holes of diameter 9.0 and 4.2 with pitch of 12.5 mm
- Base: Manufactured using 3.00 thick folded sheets with removable front and rear cover in 2.00 thick
- Door: Front & rear single door / split door / partial door in 2.00 thick CRCA sheet with support channels, sheet metal special hinges, 3/4 point handle lock
- Cover: Front fixed bolted cover in 2.00 thick for instrumentation panel in place of door, when door not necessary at rear screwed cover in 1.5 thick
- Gland plate: Varying combination like, Folded CRCA bottom cover or Slotted / perforated (for ventilation from bottom if required) bottom cover in 1.5 thick
- Side cover: Screwed side cover in 1.5 thick CRCA sheet
- Top cover: in 1.5 thick CRCA bolted in lifting eye bolts itself
- "C Plate : In 2.00 thick / 3.00 thick as per requirement maximum size is (W-100) x (H-100)
- Inter panel separator: Made in 1.5thick vertical or horizontal
- Lifting eye bolts: Hooks are used for normal weight & heavy duty angles for bigger enclosures
- 19" Rack: Din Standard 19" equipment mounting arrangement is possible.
- 19"Swing frame: suitable for 19" mounting in width and height as per the requirements of our clients
Standard sizes:
Width |
Depth |
Height |
Base |
500 mm-2000 mm (pith of 100 mm) |
400 mm-1000 mm (pith of 50 mm) |
1000 mm-2200 mm (pith of 100 mm) |
75 mm , 100 mm 150 mm , 200 mm |
Points to be noted related to size:
- Up to 1000 mm width single door can be provided & for width above 1000 mm split doors are recommended
- Up to 1200 mm width single welded structure can be provided & for width above 1000 mm two Separate structure or twin welded structure is recommended
Salient features:
- Strongest design available in enclosures
- Perfect Strength to weight ratio
- Better Ingress protection (up to IP-55)
- Multi color powder coating is possible